INTRAFIX SAFESET CARESITE
Anti-drip (PRIME-STOP) and anti-emptying (AIR-STOP) infusion flowers for infusion of drugs (e.g., drugs to restore hydro-saline balance, parenteral nutrition, volume expanders, antibiotics, cytostatics, other drugs, ectc ), infusion solutions, and parenteral nutrition through appropriate infusion routes. Composition:
Perforator: dual way (liquids and air) provided with air and liquid holes spaced to minimize air bubble calls in the liquid way. Free of asperities so as not to cause fragments to detach from the elastomeric membrane of bottles/bags/bottles during perforation

Drip chamber: Equipped with AirStop filter with 15 µm filtering capacity heat-sealed at the base of the chamber capable of retaining particulate matter and preventing air from passing into the tubing following the emptying of the drip chamber. This mechanism provides an opportunity for the drip chamber to be filled several times without air entry.

Air intake valve: For pressure compensation during infusion sa rigid plastic or glass bottle. Equipped with antibacterial, hydrophobic filter with filtering capacity of 1.2 µm and protected by easily opened cap ("open-close" type device ). The valve complies with NIOSH 2004 canons of ''Closed System,'' isolating the system by preventing contamination of the line and the environment.
INTRAFIX SAFESET P 220CM,15YM+DISCOFIX
Anti-drip (PRIME-STOP) and anti-emptying (AIR-STOP) infusion flowers for infusion of drugs (e.g., drugs to restore hydro-saline balance, parenteral nutrition, volume expanders, antibiotics, cytostatics, other drugs, ectc ), infusion solutions, and parenteral nutrition through appropriate infusion routes. Composition:
Perforator: dual way (liquids and air) provided with air and liquid holes spaced to minimize air bubble calls in the liquid way. Free of asperities so as not to cause fragments to detach from the elastomeric membrane of bottles/bags/bottles during perforation

Drip chamber: Equipped with AirStop filter with 15 µm filtering capacity heat-sealed at the base of the chamber capable of retaining particulate matter and preventing air from passing into the tubing following the emptying of the drip chamber. This mechanism provides an opportunity for the drip chamber to be filled several times without air entry.

Air intake valve: For pressure compensation during infusion sa rigid plastic or glass bottle. Equipped with antibacterial, hydrophobic filter with filtering capacity of 1.2 µm and protected by easily opened cap ("open-close" type device ). The valve complies with NIOSH 2004 canons of ''Closed System,'' isolating the system by preventing contamination of the line and the environment.
SANGOFIX B
Infusion set intended for gravity administration of blood and blood derivatives intravenously Drip chamber
- With high transparency
- Wide
- Easily compressible at its bottom for liquid recall
- Equipped with a 200 µm tubular filter
- Filling volume lower part: 10.5 ml

Perforator without air intake
- Free of asperities so as not to cause fragments to detach from the elastomeric membrane of bottles/bags/bottles during perforation
- Calibrated to obtain 20 drops of distilled water per milliliter

Tubing
- Inner diameter: 3.0 mm
- Outer diameter: 4.1 mm
- Bolus volume: 6.3 ml/m at 40°C and 2 bar
- Total length: 180 cm (code 4116011F) and 150 cm (code 4117301)
- High transparency
SANGOFIX AIR 180 CM, LUER LOCK
Infusion set intended for gravity administration of blood and blood derivatives intravenously Drip chamber
- With high transparency
- Wide
- Easily compressible at its bottom for liquid recall
- Equipped with a 200 µm tubular filter
- Filling volume lower part: 10.5 ml

Perforator with air intake
- Dual way, liquid and air
- Provided with air and liquid holes spaced to minimize air bubble recalls in the liquid pathway
- Free of asperities so as not to cause fragments to detach from the elastomeric membrane of bottles/bags/bottles during perforation
- Calibrated to achieve 20 drops of distilled water per milliliter

Tubing
- Inner diameter: 3.0 mm
- Outer diameter: 4.1 mm
- Bolus volume: 6.3 ml/m at 40°C and 2 bar
- Total length: 180 cm (code 4116011F) and 150 cm (code 4117301)
- High transparency
T-PORT 10CM
T-extension with injection point and slide clamp

■ Female Luer-Lock connector
■ Latex-free and DEHP-free outer ø 2.4 mm
inner ø 1.3 mm
Volume 0.1 ml
Length 10 cm
DISCOFIX - 3-WAY BLUE
3-way taps , for infusion and monitoring lines, with luer-lock connections made of lipid-resistant polycarbonate. The filling volume of the 3-way tap is 0.2 ml. Pressure resistant up to 2.0 bar

Composition:
- Faucet body: Lipid-resistant polycarbonate
- Rotator: Polyethylene(PE)
- Male Luer Lock fitting: Polyethylene(PE)
DISCOFIX - 3-WAY WHITE
3-way taps , for infusion and monitoring lines, with luer-lock connections made of lipid-resistant polycarbonate. The filling volume of the 3-way tap is 0.2 ml. Pressure resistant up to 2.0 bar

Composition:
- Faucet body: Lipid-resistant polycarbonate
- Rotator: Polyethylene(PE)
- Male Luer Lock fitting: Polyethylene(PE)
DISCOFIX - 3-WAY RED
3-way taps , for infusion and monitoring lines, with luer-lock connections made of lipid-resistant polycarbonate. The filling volume of the 3-way tap is 0.2 ml. Pressure resistant up to 2.0 bar

Composition:
- Faucet body: Lipid-resistant polycarbonate
- Rotator: Polyethylene(PE)
- Male Luer Lock fitting: Polyethylene(PE)
DISCOFIX-3 BLUTUBO 10CMLL
3-way taps with extension, for infusion and monitoring lines, with luer-lock connections made of lipid-resistant polycarbonate. Consists of rotator with smooth 360° rotation and precise detection of correct tap position every 45°.

Composition:
- Faucet body: lipid-resistant polycarbonate
- Rotator: Polyethylene(PE)
- Male Luer Lock fitting: Acrylonitrile-butadiene-styrene (ABS)
- Extension tube: Polyvinyl chloride (PVC) DEHP-free
DISCOFIX-3 BLULL TUBE 25CM
3-way taps with extension, for infusion and monitoring lines, with luer-lock connections made of lipid-resistant polycarbonate. Consists of rotator with smooth 360° rotation and precise detection of correct tap position every 45°.

Composition:
- Faucet body: lipid-resistant polycarbonate
- Rotator: Polyethylene(PE)
- Male Luer Lock fitting: Acrylonitrile-butadiene-styrene (ABS)
- Extension tube: Polyvinyl chloride (PVC) DEHP-free