High-frequency electrosurgery suitable for monopolar and bipolar precision surgery and microsurgery without tissue alteration.
It allows surgical treatments with programmable operating times in milliseconds, or operate in traditional mode.
MB FLASH allows pure CUT cut, BLEND cut-coagulation, incisions with reduced carbonisation production ENHANCED, surface coagulation FORCED COAG, depth coagulation without necrosis SOFT COAG and bipolar coagulation BIPOLAR COAG.

The digital readout of the power output and the monitoring of the operating functions by means of a microcontroller ensure absolutely reliable working conditions.
The neutral electrode connection is constantly monitored.
The safety of the plate/patient contact is monitored by a bipartite neutral electrode.
The ability to control the functions and power supply from the electrode holder handpiece allows surgical procedures to be performed without diverting attention from the operating field.

Features:
- plate-patient contact control
- allows use of bipartite neutral electrode
- minimally invasive surgical treatment
- independent monopolar and bipolar functions
- automatic start/stop in bipolar coagulation
- programming of working conditions
- power delivery with foot pedal and/or handpiece
- digital power adjustment and display
- adjustable sound output intensity
- adjustable power increase
- setting of emission time and RF power pulse interval max. power CUT: 120 W-250 Ohm
Max. power BLEND: 90 W-200 Ohm
Max. power ENHANCED: 90 W-250 Ohm
Max. power FORCED COAG: 80 W-150 Ohm
Max. power SOFT COAG: 60 W-100 Ohm
Max. power BIPOLAR COAG: 60 W-50 Ohm
Working frequency: 600 kHz
Sterilisable two-button MB handpiece (30536)
Flexible steel neutral plate with cable (30555-30560)
MB watertight foot pedal (30577)
Kit 10 short standard electrodes Ø 2.4 mm
3 needle + 3 blade + 3 ball electrodes 7 cm
2 disposable plates (30562)
Cable

Autoclavable handpiece equipped with two large buttons, a 5-metre silicone cable and an electrode blade. Can be sterilised up to 100 times (electrode up to 20 times). For electrodes Ø 2.4 mm.

DIATERMO MB 122 VALUE - mono-bipolar - 120 Watts
(does not include pedal and flat plate with cable)

High-frequency electronic scalpel suitable for monopolar medium surgery and bipolar coagulation.

Operation modes include clean cut, coagulated cut, forced coagulation, soft coagulation and bipolar coagulation with forceps.

It can be used with normal or neutral plate.

State-of-the-art technology: these devices enable highly professional surgical procedures thanks to safety features derived from superior equipment.

Total safety. OC (open circuit) alarm: an acoustic signal and a flashing red light warn the user that the plate is not inserted. In this case, cutting and coagulation operations are set to OFF.

OVT alarm: control system that prevents the high-frequency generating power module from overheating. - Minimum selectable power: 0
- Power step: 1
- Max. power cut CUT (W): 120 250 Ohm
- Max. power cut COAG BLEND (W): 90 200 Ohm
- Max. coagulating power COAG FORCED (W): 80 150 Ohm
- COAG SOFT max. coagulation power (W): 60 - MB handpiece with 2 buttons, disposable
- Kit of 6 autoclavable electrodes diameter 2.4 mm
- User manual in IT, GB, ES, FR, PL.
- Power cable 2 metres

DIATERMO MB200 - mono-bipolar - 200 Watts

High-frequency electrosurgical unit for performing medium monopolar and bipolar electrosurgery. The available waveforms and peak voltages used, as well as the accurate control of the high-frequency leakage currents, make the unit suitable for use in endoscopic surgery (polypectomy, TURP prostate resection, papillectomy, uterine resection, endometrial ablation) Adjustable output power level with 1 Watt resolution to perform coagulation with high crest factor current (for a high thermal effect), or with low crest factor current (for coagulation without carbonisation). Ten programmes for ten different operating conditions can be memorised and easily recalled by the surgeon. Possibility of connecting joined and bipartite electrodes. The plaque-patient contact monitoring circuit safeguards the patient from the danger of burns due to accidental detachment of the reference plaque. Dispensing time signalling is provided to prevent excessive tissue heating. Max. power CUT (W): 200 250Ohm (Crest factor 1.5)
Max. power CUT 90% (W): 200 250Ohm (Crest factor 1.6)
Max. power CUT 80% (W): 200 250Ohm (Crest Factor 1.7)
Max. power CUT 70% (W): 200 250Ohm (Crest factor 1.8)
Max. power BLE - 2-button autoclavable handpiece (30536)
- MB 30577 watertight foot pedal (alternative to handpiece)
- Kit of 10 short electrodes diam. 2.4 mm
- Metal plate with cable 30564
- Power cable length 2 metres
- Manual in: EN, GB

DIATERMO MB200D - mono-bipolar - 200 Watts

The MB 200D is a high-frequency electric scalpel for monopolar and bipolar precision surgery. For minimally invasive surgical resection, evaporation and coagulation treatments, it performs pure CUT cutting, incisions with reduced necrosis production, BLEND coagulated cutting, FORCED COAG surface coagulation, SOFT COAG depth coagulation and BIPOLAR bipolar coagulation.
Digital readout of the power output and micro-processor monitoring of the operating functions ensure absolutely reliable working conditions.
For highly professional surgery thanks to the ergonomic and safety solutions adopted.
The electrosurgical unit is equipped with a control system to check the correct functioning of the neutral electrode.
The possibility of switching functions and controlling the power output of the electrode holder allows surgery to be performed without
diverting attention from the operating field.

- plate-patient contact control
- possibility of using single or bipartite neutral electrodes
- use in minimally invasive surgery
- monopolar/ bipolar cutting and coagulation function
- auto start/stop in bipolar COAG
- storage of working conditions
- power activation with foot pedal and/or handpiece
- digital power adjustment and display
- adjustment of sound emission intensity - Max. power CUT: 200W - 250 Ohm
- Max. power ENHANCED: 120W - 250 Ohm
- Max. power BLEND: 120W - 200 Ohm
- Max. power FORCED COAG: 150W - 150 Ohm
- Max. power SOFT COAG: 90W - 100 Ohm
- Max. power BIPOLAR COAG: 80W - 50 Ohm
- Wash frequency - MB handpiece with 2 autoclavable buttons (30536)
- MB watertight foot pedal (30577)
- Metal plate with cable (30564)
- Kit 10 standard electrodes, Ø 2.4 mm
- 3 blade + 3 needle + 3 ball electrodes 7 cm
- Power cable 5 m
- User manual: IT, GB

DIATERMO MB 80D - mono-bipolar - 80 Watts

Diatermo MB-D is a high-frequency electronic electrosurgical scalpel suitable for small and medium-sized surgery.

Through the selection of functions it allows pure CUT cutting, BLEND coagulated cutting, FORCED COAG superficial coagulation, SOFT COAG depth coagulation and, with a special adapter, BIPOLAR bipolar coagulation.

Digital readout of the power delivered and microcontroller monitoring of operating functions help to create the best conditions for intervention.

Diatermo MB-D enables highly professional surgery thanks to the ergonomic and safety solutions adopted. The electrosurgical unit is equipped with a system for monitoring the correct operation of the neutral electrode.

It is possible to switch functions and control the power supply from the electrode handpiece, allowing surgery to be performed without diverting attention from the operating field.

Features:
- minimally invasive surgery
- possibility of using bipolar forceps
- possibility of using bipolar neutral electrodes
- storage of the last settings used
- power activation with foot pedal and/or handpiece
- digital power adjustment and display
- adjustment of sound emission intensity - Max. power cut CUT: 80 W - 250 Ohm
- BLEND cut-coagulated max. power: 60 W - 250 Ohm
- Max. coagulation power FORCED COAG: 50 W - 150 Ohm
- Max. coagulation power SOFT COAG: 40 W - 100 Ohm
- BIPOLAR max. coagulation power BIPOLAR: 30 W - 100 Ohm - MB disposable handpiece with 2 buttons
- Watertight operating pedal 30577 (alternative to handpiece)
- 30564 flat plate with cable
- Kit of 10 autoclavable electrodes, Ø 2.4 mm
- Power cable 2 m
- User manual: GB, IT, available s

High-frequency electrosurgery suitable for monopolar and bipolar precision surgery and microsurgery without tissue alteration.
It allows surgical treatments with programmable operating times in milliseconds, or operate in traditional mode.
MB FLASH allows pure CUT cut, BLEND cut-coagulation, incisions with reduced carbonisation production ENHANCED, surface coagulation FORCED COAG, depth coagulation without necrosis SOFT COAG and bipolar coagulation BIPOLAR COAG.

The digital readout of the power output and the monitoring of the operating functions by means of a microcontroller ensure absolutely reliable working conditions.
The neutral electrode connection is constantly monitored.
The safety of the plate/patient contact is monitored by a bipartite neutral electrode.
The possibility of controlling the functions and power supply from the electrode handpiece allows surgical procedures to be performed without diverting attention from the operating field.

Features:
- plate-patient contact control
- allows use of bipartite neutral electrode
- minimally invasive surgical treatment
- independent monopolar and bipolar functions
- automatic start/stop in bipolar coagulation
- programming of working conditions
- power delivery with foot pedal and/or handpiece
- digital power adjustment and display
- adjustable sound output intensity
- adjustable power increase
- setting of emission time and RF power pulse interval max. power CUT: 200 W-250 Ohm
Max. power BLEND: 120 W-200 Ohm
Max. power ENHANCED: 120 W-250 Ohm
Max. power FORCED COAG: 150 W-150 Ohm
Max. power SOFT COAG: 90 W-100 Ohm
Max. power BIPOLAR COAG: 80 W-50 Ohm
Working frequency: 600 kHz
Time Two-button sterilisable MB handpiece (30536)
Flexible steel neutral plate with cable (30555-30560)
MB watertight foot pedal (30577)
Kit 10 short standard electrodes Ø 2.4 mm
3 needle + 3 blade + 3 ball electrodes 7 cm
2 disposable plates (30562)
Cable

MONOPOLAR 3-PIN HANDLE FOR 2.4 mm diameter ELECTRODES

- DISPOSABLE ROCKER HANDLE - STERILE - pack of 50
Single-use handpiece with rocker switch for cutting and coagulation.
Includes electrode blade and 3.20 m cable.

VALLEYLAB HANDPIECES WITH DOUBLE-CLICK BUTTONS
GIMA electrosurgery handpieces with CUT - COAG buttons have been studied and tested to offer maximum reliability and functionality to the operator. They are all equipped with a ValleyLab-type three-pole socket compatible with all GIMA single-bipolar MB Diatermo handpieces (80, 120, 122, 132, 160, 200, 240, 300, 380, 400) and most electrosurgical equipment: Aspen Lab, ES Generator, EMC Statome, Danieli, Braun, Berchtold, Ohmeda, Ritter, Conmed, Eschman, Bovie, Martin; Kontron, Bard, Birtcher 771, Cobi, ValleyLab, Led Erbe....

Multilingual instructions: GB, FR, IT, ES, PT, DE, NL, PL, RO, HU, DK, SE, FI, EE, LV, RU, SK, CZ, HR, SI, GR, BG, TR, Arabic.

DIATERMO MB 122 - mono-bipolar - 120 Watts

High-frequency electronic scalpel suitable for monopolar medium surgery and bipolar coagulation.

Operation modes include clean cut, coagulated cut, forced coagulation, soft coagulation and bipolar coagulation with forceps.

It can be used with normal or neutral plate.

State-of-the-art technology: these devices enable highly professional surgical procedures thanks to safety features derived from superior equipment.

Total safety. OC (open circuit) alarm: an acoustic signal and a flashing red light warn the user that the plate is not inserted. In this case, cutting and coagulation operations are set to OFF.

OVT alarm: control system that prevents the high-frequency generating power module from overheating. - Minimum selectable power: 0
- Power step: 1
- Max. power cut CUT (W): 120 250 Ohm
- Max. power cut COAG BLEND (W): 90 200 Ohm
- Max. coagulating power COAG FORCED (W): 80 150 Ohm
- COAG SOFT max. coagulation power (W): 60 - MB handpiece with 2 buttons, single-use
- Operating pedal 30577 (alternative to handpiece)
- 30564 flat metal plate with cable
- Kit of 6 autoclavable electrodes diameter 2.4 mm
- User manual in IT, GB, ES, FR, PL.
- Power cable

DIATERMO MB 160 - mono-bipolar - 160 Watts

High-frequency electronic scalpel suitable for monopolar medium surgery and bipolar coagulation.

Operation modes include clean cut, coagulated cut, forced coagulation, soft coagulation and bipolar coagulation with forceps.

It can be used with normal or neutral plate.

The Diatermo MB160 is particularly suitable if the operating field is very humid, e.g. mucous membranes, or if the tissue composition is very varied, resulting in the need for a usable power reserve. For these reasons, the MB160 Diatermo is recommended for gynaecological and orthopaedic surgery.

State-of-the-art technology: these devices enable highly professional surgery thanks to the safety features derived from superior equipment.

Total safety: OC (open circuit) alarm: an acoustic signal and a flashing red light warn the user that the plate is not inserted. In this case, cutting and coagulation operations are set to OFF.

OVT alarm: control system that prevents the high-frequency generating power module from overheating. - Minimum selectable power: 0
- Power step: 1
- Max. power cut CUT (W): 160 250 Ohm
- Max. power cut COAG BLEND (W): 120 200 Ohm
- Max. coagulating power COAG FORCED (W): 100 150 Ohm
- Max. coagulation power COAG SOFT (W): - MB handpiece with 2 buttons, single-use
- Operating pedal 30577 (alternative to handpiece)
- Flat metal plate with cable 30564
- Kit of 10 autoclavable electrodes diameter 2.4 mm
- User manual in IT, GB, ES, FR, PL.
- Power supply cable