Ideal for dieticians, gyms and sports centres, also perfect for home use. It allows you to know not only your ideal weight but also your nutritional health status. The GIMA Body Fat Analyser measures the flow of electrical signals (impedance or electrical resistance of the human body) through ADIPOSE, LEAN tissues (muscles, bones, organs) or WATER. When the amount of adipose, lean tissue or water changes, so does the signal
of body mass, thus providing a reliable and accurate measure of the proportion of each of these components in the total weight.
Specifically, four electrodes are applied to the metacarpals and metatarsals, with a current of 50 kHz. The signal level corresponds to the index of water mass and total fat mass. It only takes 2 minutes for this essential and very simple test. The procedure takes only 2 minutes and provides the same accuracy as other more expensive devices.

Lots of useful data:
- FAT MASS: real weight of the body's fat tissue
- LEAN MASS: actual weight of the lean tissues, mainly muscles and organs
- WATER: water level in the body
- % FATTY MASS: percentage of fat mass in relation to total weight
- % LEAN MASS: percentage of lean mass in relation to total weight
- Basal metabolism (BMR)
- Ideal weight: weight target under optimal conditions
- % ideal fat mass in relation to gender and age.
Its small size and light weight make it portable, so the test can be performed anywhere. The analyser helps you regain your shape and maintain it.
It allows you to maximise your ideal level of fitness, whether you want to lose weight, increase muscle mass, tone and trim or simply maintain your current shape:
- allows you to control the effectiveness of your diet programme by precisely establishing the origin of your weight loss (adipose tissue, organic or water)
- helps you monitor improvements in muscle mass as a result of physical exercise and/or diet
- establishes a basic parameter of your body composition so that you can regularly monitor your dietary or physical improvements over time

Frequent calibration is required for accurate results (27324 calibration kit).
Supplied with carrying bag, set of 2 electrode cables, pack of 20 electrodes, 2x9 V batteries, power supply and user manual (IT, GB, FR, ES). - Dimensions: 66 x 176 x h 208 mm
- Test frequency: approx. 50 KHz
- Current during test: less than 1 mA
- Weight: 1500 g (with batteries and cables)
- Power supply: 2 x 9V batteries or 230V transformer

FIAB pre-cellular electrodes are designed for electrotherapy applications.
They are suitable for analysing body composition.
The flexibility of the material allows the electrodes to be positioned very easily.
The gel used, which is supplied in a solid state and has great adhesive properties, makes the product repositionable, thanks to the internal PVC silicone coating.

They do not contain latex.

180° LONG ARM GONIOMETER - 35 cm

Very long arms, suitable for measuring all joints.
The arm has a linear scale marked in 1° increments.

Multilingual manual: GB, FR, IT, ES.

360° GONIOMETER - 35 cm

Features two opposing 180° scales and one 360° scale, all marked in 1° increments.
Sturdy, adjustable knob to adjust arm tension.

Multilingual manual: GB, FR, IT, ES.

ROBINSON 180° GONIOMETER - 17.5 cm

Robinson 180° pocket goniometer for doctors and therapists.
Linear scale in 5° increments.

Multilingual manual: GB, FR, IT, ES.

FINGER GONIOMETER - 15 cm

Useful for measuring the range of movement of finger joints.
Ruler in inches and centimetres.
180° marked in 5° increments.

Multilingual manual: GB, FR, IT, ES.

DIGIT GONIOMETER 180° - 15 cm

Allows one-handed measurement.
Measures 110° flexion through 40° hyperextension in 5° increments.

Multilingual manual: GB, FR, IT, ES.

GIMA LED PODOSCOPE

The GIMA podoscope with polarised light allows observation of the plantar surface and, thanks to its remarkable brightness, highlights the areas of greatest pressure. The structure on which the feet rest is made of highly resistant methacrylate, with excellent light-conducting capacities, which through polarisation of the light allows significant variations in chromatic intensity on the points of greatest and least plantar load.

- Highly resistant, easy maintenance
High-quality materials and components, assembly and continuous checks during production and final testing ensure superior precision. The resilient structure can withstand loads of up to 135 kg. The green LED light has a lifetime of 25,000 hours (indicated by the manufacturer).

- Simple, handy and practical
By pressing the power switch, the podiatrist is immediately operational. When the subject positions himself on the supporting surface, observation of the plantar area can be carried out in real time. The construction technology makes it a practical and user-friendly piece of equipment. As methacrylate is a light and resistant material, it is easy to move around due to its low weight and is also easy to transport due to its compact dimensions.
The low table top (only 22 cm from the ground) makes it easy to climb even for people with mobility difficulties.

Multilingual manual: GB, FR, IT, ES, PT, DE, FI, RO

Made in Italy. Capacity: 135 kg
Dimensions: 43.5x42.5xh 22 cm
Weight: 8 kg
Operating voltage: 220V-50/60 Hz - schuko plug (UK plug available on request)
Green LED light lasting 25,000 hours

Useful for analysing posterior, anterior and lateral posture.
The patient must stand with their feet in the position indicated on the footplate.
The analyser consists of a footplate, a plastic grid, two aluminium side rods complete with millimetre gauges where the sliders with wires for postural alignment (Barré vertical) run and an adjustable mirror.
The image reflected on the upper mirror allows observation of all shoulder rotations.

Manual: GB, IT. On request ES.

Equipped with three horizontal and two vertical elastic bands, adjustable in height and width respectively by means of slides, which can be used as reference lines when observing the patient's upright posture and searching for asymmetries and deviations.

Made in Italy.

Dimensions: 60x66xh 220 cm
Load capacity: 200 kg

GAUGE FOR MEASURING NEWBORNS

Made of oxidised aluminium, graduated from 0 to 90 cm with notches every 5 mm.

Certified by the Metric Office.

Weight: 300 g.

Made in Italy.