FLAT POUCHES FOR STEAM STERILISATION OR ETO

Transparent green polyester-polyethylene film laminated to medical paper that allows steam and gas to penetrate during sterilisation. Steam and gas indicators change colour when exposed to sterilisation.

1. Reinforced corners prevent dust from accumulating near the opening, reducing the risk of contamination of contents upon opening.

2. The transparent film complies with German standard EN 10/204. The medical paper complies with the following standards: DIN 58953 (German), Pharmacopea 589 (French), pr EN 868-3 (European) and BS 6256 (English).

3. The chevrons allow the envelopes to be opened quickly and correctly. The envelopes are also marked with the correct opening direction.

4. The pouches consist of a layer of transparent laminated film (a special type of polyester and polypropylene copolymer) and white medical Kraft moisture-resistant paper, specially designed to provide high antibacterial protection.

5. Multiline' sealing is strong and durable; the sealing lines are evenly spaced and the outer sealing line runs along the entire length of the pouch to ensure maximum sealing.

All rolls and pouches are certified and manufactured according to DIN 58953 BS 6871, EN 868-5, CN 13485

- Outside (m x mm): 400 x 600
- Inside (m x mm): 378 x 585

FLAT POUCHES FOR STEAM STERILISATION OR ETO

Transparent green polyester-polyethylene film laminated to medical paper that allows steam and gas to penetrate during sterilisation. Steam and gas indicators change colour when exposed to sterilisation.

1. Reinforced corners prevent dust from accumulating near the opening, reducing the risk of contamination of contents upon opening.

2. The transparent film complies with German standard EN 10/204. The medical paper complies with the following standards: DIN 58953 (German), Pharmacopea 589 (French), pr EN 868-3 (European) and BS 6256 (English).

3. The chevrons allow the envelopes to be opened quickly and correctly. The envelopes are also marked with the correct opening direction.

4. The pouches consist of a layer of transparent laminated film (a special type of polyester and polypropylene copolymer) and white medical Kraft moisture-resistant paper, specially designed to provide high antibacterial protection.

5. Multiline' sealing is strong and durable; the sealing lines are evenly spaced and the outer sealing line runs along the entire length of the pouch to ensure maximum sealing.

All rolls and pouches are certified and manufactured according to DIN 58953 BS 6871, EN 868-5, CN 13485

- Outside (m x mm): 250 x 400
- Inner (m x mm): 228 x 385

FLAT ROLLS for steam or ethylene oxide sterilisation

- Flat rolls
- Outer: 200 m x 50 mm
- Inner: 200 m x 36 mm

Transparent polyester/polypropylene and medical paper film that allows steam and gas penetration during sterilisation.
Steam and gas indicators change colour when exposed to sterilisation.

Made in Italy.

FLAT ROLLS for steam or ethylene oxide sterilisation

- Flat rolls
- Outer: 200 m x 75 mm
- Inner: 200 m x 53 mm

Transparent polyester/polypropylene and medical paper film that allows steam and gas penetration during sterilisation.
Steam and gas indicators change colour when exposed to sterilisation.

Made in Italy.

TITANOX HOT AIR STERILISERS

- Unit: Standard
- Capacity: 20 litres
- External dimensions (mm): 570x345xh 400
- Internal measurements (mm): 405x255xh 210

Internal structure and height adjustable shelves made entirely of stainless steel.
Lockable.

Standard unit: double resistance to reach higher temperatures more quickly.

All-stainless steel outer structure and front, including hollow-core door heavily insulated with non-conductive material.

All models are supplied with manual in: GB, FR, IT (ES on request) and 2 height-adjustable trays.

Made in Italy. Timer: 0-120 minutes, switches off at the end of the programmed time
Probe thermometer: 0° - 200°
Probe thermoregulator: 0° - 200°.
Operating voltage: 230 V - 50/60 Hz

GIMETTE 50 - dry steriliser.
Fully automatic hot air steriliser with temperature control from 0°C to 200°C.The structure is made of stainless steel.

Externally, except for the door, it is powder-coated for maximum resistance to heat, shock and time.

The 4 trays are made of anodised aluminium with large holes to facilitate hot air circulation.

Capacity: approx. 50 litres.
A second safety thermostat intervenes to control the temperature should it exceed the 230°C threshold.
The red light indicates a possible fault in the temperature regulator and thus the activation of the safety thermostat. - Internal dimensions mm: 405 x 340 x 350
- Volume approx: 50 dm³
- External measurements mm: 605 x 460 x 480
- Weight: 24.5 kg
- Absorption: 1200W
- Power supply: 230 V - 50/60 Hz
- Fuses: 2 x 8 A
- Thermostat: automatic with liquid expansion capillary
-

Replacement gasket for part no. 35607.

Product available while stocks last.

TAU dry sterilisers are designed to meet the daily needs of a medical practice. Extremely robust, fully automatic, they guarantee sterilisation in absolute safety.

TAU 6 has an internally insulated double wall, the exterior is made of stove-enamelled sheet steel, the interior of 18/8 stainless steel (double cover, sterilisation chamber and perforated removable tray). - Internal dimensions: 385 x 270 x h 90 mm
- External dimensions: 495 x 310 x h 220 mm
- Weight: 10.5 kg
- Power supply: 220 V
- Absorption: 250 W
- Thermostat: Automatic bulb with self-adjustment from 90 to 200 °C
- Timer: 0 to 120 minutes
- Thermo

Gasket for GIMETTE 21 - dry steriliser (Code 35621)