Gasket for GIMETTE 50 - dry steriliser (cod. 35629)

Replacement tray for dry steriliser Gimette 28 (code 35628).

Gasket for GIMETTE 28 - dry steriliser (Code 35628)

Gimette steriliser thermometer.

TITANOX HOT AIR STERILISERS

- Unit: Digital
- Capacity: 20 litres
- External dimensions (mm): 570x345xh 400
- Internal measurements (mm): 405x255xh 210

Internal structure and height adjustable shelves made entirely of stainless steel.
Lockable.

Digital unit: adjustable ventilation tunnels on the right side at the bottom and on the left side at the top for the regulation and circulation of hot air, useful for rapid cooling of the unit.

- electronic C.P.S. operation.
- optimal heat distribution
- automatic indication of any power supply problems (in the event of a power failure, the programme restarts from the beginning)
- safety thermostat

All models are supplied with manual in: GB, FR, IT (ES on request) and 2 height-adjustable trays.

Made in Italy. Operating mode: continuous (standby) or timed
Timer: 0 - 250 minutes
Operating voltage: 230 V - 50/60 Hz

TITANOX HOT AIR STERILISERS

- Unit: Digital
- Capacity: 120 litres
- External dimensions (mm): 835x565xh 555
- Internal measurements (mm): 670x420xh 415

Internal structure and height-adjustable shelves made entirely of stainless steel.
Lockable.

Digital unit: adjustable ventilation tunnels on the right side at the bottom and on the left side at the top for the regulation and circulation of hot air, useful for rapid cooling of the unit.

- electronic C.P.S. operation.
- optimal heat distribution
- automatic indication of any power supply problems (in the event of a power failure, the programme restarts from the beginning)
- safety thermostat

All models are supplied with manual in: GB, FR, IT (ES on request) and 2 height-adjustable trays.

Made in Italy. Operating mode: continuous (standby) or timed
Timer: 0 - 250 minutes
Operating voltage: 230 V - 50/60 Hz

TITANOX HOT AIR STERILIZER - 3 l

Stainless steel outer structure. Internal structure, grid, removable perforated tray, door and counter-door made entirely of stainless steel.
Internal structure and door with non-toxic silicone rubber gasket, insulated with fibreglass.
Armoured stainless steel heating element.
0-120 minute timer that switches the appliance off at the end of the programmed time.
Safety thermostat.

Green indicator light (on the right) indicating the line is switched on.
Green indicator light (on the left) indicating the heating element is in operation.

Supplied with manual in GB, FR, IT (ES on request).

Made in Italy. Capacity: 3 l
Timer: 0 - 120 minutes
Probe thermometer: 0° - 200°C
Probe thermoregulator: 0° - 200°C
Operating voltage: 230 V-50/60 Hz
External dimensions: 400x295xh 170 mm
Internal dimensions: 300x125xh 80 mm
Classification: Medium device

TITANOX HOT AIR STERILISERS

- Unit: Thermoventilated
- Capacity: 20 litres
- External dimensions (mm): 570x345xh 400
- Internal measurements (mm): 405x255xh 210

Internal structure and height adjustable shelves made entirely of stainless steel.
Lockable.

Thermo-ventilated unit: to ensure temperature uniformity inside the heating chamber and allow air circulation, the unit is equipped with a wired fan that is always running, both during the heating cycle and during the cooling pauses.

- safety thermostat
- fan for forced ventilation
- double control bulb

All models are supplied with manual in: GB, FR, IT (ES on request) and 2 height-adjustable trays.

Made in Italy. Timer: 0-120 minutes, switches off at the end of the programmed time
Probe thermometer: 0° - 200°
Probe thermoregulator: 0° - 200°.
Operating voltage: 230 V - 50/60 Hz

TITANOX HOT AIR STERILISERS

- Unit: Thermoventilated
- Capacity: 60 litres
- External dimensions (mm): 705x450xh 475
- Internal measurements (mm): 535x320xh 345

Internal structure and height-adjustable shelves made entirely of stainless steel.
Lockable.

Thermo-ventilated unit: to ensure uniform temperature inside the heating chamber and allow air circulation, the unit is equipped with a wired fan that is always running, both during the heating cycle and during the cooling pauses.

- safety thermostat
- fan for forced ventilation
- double control bulb

All models are supplied with manual in: GB, FR, IT (ES on request) and 2 height-adjustable trays.

Made in Italy. Timer: 0-120 minutes, switches off at the end of the programmed time
Probe thermometer: 0° - 200°
Probe thermoregulator: 0° - 200°.
Operating voltage: 230 V - 50/60 Hz

- Main features: welding and cutting length 35 cm - Safety control with alarm. Main board with temperature control. Electromagnetic sealing bar closure complete with coil and cutter.
- Easy to use: bar closure with one finger pressure. The electromagnet keeps the welding pressure constant for the set time. Automatic opening at the end of the cycle.
- Fast: electromagnetic closing. The operator has no difficulty in manually advancing the tube.
- Safe: the sealing bars do not close if there is an object thicker than 3 mm between them. Electronic temperature control with NTC probe. Electronic alarm protection and lockout in the event of faults.

Italian production.